Espressif Systems /ESP32-P4 /AHB_DMA /IN_CONF0_CH1

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as IN_CONF0_CH1

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (IN_RST_CH)IN_RST_CH 0 (IN_LOOP_TEST_CH)IN_LOOP_TEST_CH 0 (INDSCR_BURST_EN_CH)INDSCR_BURST_EN_CH 0 (IN_DATA_BURST_EN_CH)IN_DATA_BURST_EN_CH 0 (MEM_TRANS_EN_CH)MEM_TRANS_EN_CH 0 (IN_ETM_EN_CH)IN_ETM_EN_CH

Description

Configure 0 register of Rx channel 0

Fields

IN_RST_CH

This bit is used to reset AHB_DMA channel 0 Rx FSM and Rx FIFO pointer.

IN_LOOP_TEST_CH

reserved

INDSCR_BURST_EN_CH

Set this bit to 1 to enable INCR burst transfer for Rx channel 0 reading link descriptor when accessing internal SRAM.

IN_DATA_BURST_EN_CH

Set this bit to 1 to enable INCR burst transfer for Rx channel 0 receiving data when accessing internal SRAM.

MEM_TRANS_EN_CH

Set this bit 1 to enable automatic transmitting data from memory to memory via AHB_DMA.

IN_ETM_EN_CH

Set this bit to 1 to enable etm control mode, dma Rx channel 0 is triggered by etm task.

Links

() ()